Path area
length × widthFinds the finished area for a rectangular walkway section.
Adjust the project details to update the estimate.
Walkway area
Finished surface area for the entered path.
96 sq ft
Paver units
Unit count with a small allowance for edge cuts.
484
Base aggregate
Compacted gravel volume below the bedding layer.
1.2 cu yd
Bedding material
A planning amount for the setting layer.
$768–$1,728
Path area: length × width
Estimates use standard planning formulas. Verify quantities with your supplier or contractor before ordering.
See your project with AIEstimate the units and foundation materials for a walkway or compact patio. Choose a paver format, then compare how the pattern affects your order.
Measure each straight segment and add them together. Curves, circles, and wider landing zones are easier to estimate as several smaller shapes than as one long average.
The paver format controls pieces per square foot. Base depth controls the volume of aggregate, while the final sand layer helps seat the units and fill joints.
A path also needs a compacted subgrade, edge restraint, drainage plan, and a finished slope. Include those items when you turn the calculator result into a quote.
length × widthFinds the finished area for a rectangular walkway section.
area × units_per_sq_ft × 1.05Converts area into units and adds five percent for cuts.
area × base_depth ÷ 12 ÷ 27Converts the selected base depth into cubic yards.
Multiply the walkway area by the number of units per square foot for your chosen paver, then add an allowance for cuts and breakage.
Most durable installations use a compacted base, but the depth depends on soil, drainage, climate, and whether the surface carries vehicles.
This tool includes a planning quantity for bedding material. Joint sand and edge restraint should be checked against the installation system.
Preview paver patterns, edging, planting, and entry paths from an exterior photo with AI.